Chimney Notice Plate – Steel Products
Chimney Notice Plate – Steel Accessories
Exciting news from Schiedel Chimney Systems for Stove and Chimney Installers!
Whenever you register an installation with our easy to use, online guarantee registration portal, you will now accrue points based on the number of installations and installation type.
Once you have reached a minimum of 25 points, you can begin to redeem them for £25 Love2Shop vouchers.
So start to register your installations, taking full advantage of our Lifetime Guarantee on Flex and ICID, as well as guarantees on all our other ranges, and to commence earning points 🙂
Click here for more details.
Guarantee
We are confident in our products and so offer you (the owner) a generous guarantee in relation to the ICID system (the System). Provided that you comply in full with Your Responsibilities (below) and subject to the Small Print (below), we guarantee to you that the System will be free from defects for whichever is the greater of:
- a period equal to the guarantee period of the appliance to which the Liner is first connected; or
- 20 years.
For example, if your System is fitted to an appliance with a guarantee period of 10 years, we will still guarantee your System for 20 years.
In the unlikely event that the System becomes defective during the guarantee period, we will provide a like-for-like replacement for free (subject to your compliance with Your Responsibilities and subject to the Small Print). If the same model is no longer available, we will replace it with a suitable alternative.
When we say ‘no quibbles’ we mean it and so the guarantee we offer is a straightforward one; we’ve set out below what is covered and what isn’t by the guarantee as well how to ensure you benefit from it.
Click here to download the full set of responsibilities of the guarantee.
Click here to register your guarantee for this product.
B Vent is CE certified to EN1856-1 with the designation T250 N1 D Vm L11040050 (certificate number 0036 CPD9195013)
B Vent is available in 100, 125 and 150mm internal diameters. the flue size must be as recommended by the appliance manufacturer and must not be reduced, and never smaller than the appliance spigot.
This information is provided as a guide only, and for exact flue sizing recommendations, refer to appliance manufacturer’s installation instructions and design guide.
|
100mm
|
125mm
|
150mm
|
| Gas Central Heating Boiler (Wall hung/Freestanding) |
|
|
|
| Input up to 25kW |
•
|
|
|
| Input 25kW-40kW |
|
•
|
|
| Input 40kW-60kW |
|
|
•
|
| Gas Fires |
|
|
|
| Inset to BS 7977-1 |
|
•*
|
|
| Backboiler to BS 7977-2 |
|
•
|
|
| Gas Water Heaters |
|
|
|
| Input up to 25kW |
•
|
|
|
| Input 25kW -55kW |
|
•
|
|
| Input 55kW -60kW |
|
|
•
|
| Gas Stove/Cooker – (AGA/Rayburn/Stanley etc.) |
•
|
•
|
•
|
| Gas Flue Blocks |
|
|
|
| Connection IN |
•
|
•
|
|
| Connection OUT |
|
•
|
|
| Gas Warm Air Unit |
|
|
|
| Input up to 18kW |
•
|
|
|
| Input 18kW-35kW |
|
•
|
|
| Input 35kW-60kW |
|
|
•
|
* When the fire has been tested and relaxed to 125° the appliance manufacturer should be consulted.
Twin wall gas heating system designed for cost-effective venting of residential and small commercial atmospheric gas appliances with input up to 60kw. It is suitable for both internal and external use, either as a complete system or in combination with masonry, i.e. brick chimneys.
Note that BS 5440-1 requires the use of a stainless steel insulated flue on external runs exceeding 3 metres.
The Prima Smooth range is manufactured under the strict requirements of BS EN ISO 9001 Quality management scheme. Prima Smooth has corrosion certification from TÜV. Prima Smooth is listed by HETAS as a product suitable for solid fuel.
High Temperature Applications
Connecting Flue Pipe
EN1856-2 TÜV 0036 CPR 9195 029
T600 N1 W V2 L50060 GXX NM
T600 N1 W V2 L50100 GXX NM
(XX = 3 x Ø Int. of Pipe)
High Temperature Applications
Chimney Liner
EN1856-2 TÜV 0036 CPR 9195 033
T600 N1 D V2 L50060 G
T600 N1 D V2 L50100 G
Chimneys are subject to significant corrosion attack by flue gas condensates, particularly from solid fuel heavy oils and condensing appliances. Prima Plus and Prima Plus 1mm are specifically designed and manufactured to resist this corrosion. It is the only stainless steel single wall chimney system in the world to have passed the internationally recognised Gastec corrosion test.
|
Prima Plus |
Prima Plus with Lip Seal |
| Fuel |
Gas, Oil, Wood, Solid Fuel |
Gas, oil |
Continuous Firing
(Connecting Flue Pipe & Chimney Liner |
600˚C (T600) |
200˚C (T200)C |
Continuous Firing
(System Chimney) |
450˚C (T450)C |
200˚C (T200) |
| Soot Fire Restistance |
Yes (G) |
No (O) |
| Mode of Operation |
NI |
PI |
| Pressure Rating |
40Pa |
200Pa |
| Wall Thickness |
0.6mm |
| Material |
316L : 1.4404 : X2CrNiMo 17-12-2 |
Approvals
Prima Plus is CE Certified for the following applications:-
- Connecting Flue Pipe – EN1856-2 TÜV 0036 CPR 9195 017
- Chimney Liner – EN1856-2 TÜV 0036 CPR 9195 019
- System Chimney – EN1856-1 TÜV 0036 CPR 9195 018
CE Designations are as follows:-
Connecting Flue Pipe
- T600 N1 W V2 L50060 G400 M* (High Temp)
- T200 P1 W V2 L50060 O200 M* (Low Temp)
- T200 N1 W V2 L50060 O200 M* (Low Temp)
System Chimney
- T450 N1 W V2 L50060 G50** (High Temp)
T450 N1 D V2 L50060 G50*** (Low Temp)
T200 P1 W V2 L50060 O200 (Low Temp)
Chimney Liner
- T600 N1 W V2 L50060 G (High Temp)
- T200 P1 W V2 L50060 O (Low Temp)
* M stands for measured distance to combustibles on a connecting flue pipe application in the range of diameters Ø150-Ø200
For other diameters in the range the following distances should be used:
When The product is used on solid fuel applications Ø100 = 375mm Ø130 = 390mm
** Used internally inside a non combustible shaft
*** Insulated and used internally inside a suitable enclosure
The Prima Plus range is manufactured under the strict requirements of BS EN ISO 9001 Quality management scheme. Prima Plus has corrosion certification from Gastec, MPA and TÜV. Prima Plus is listed by HETAS as a product suitable for solid fuel.
ICS Plus Approvals and Technical Details
|
ICS |
ICS Plus |
ICS 5000 |
| Fuel |
Gas, Oil, wood, coal |
Gas, oil |
Deisel generators, gas, oil |
| Firing temp |
450°C |
160°C |
– |
| Continuous Firing temp |
– |
– |
540°C |
| Short Firing temp |
550°C |
200°C |
760°C |
| Thermal Shock |
1000°C |
– |
1100°C |
| Mode of Operation |
Zero & negative pressure |
Positive pressure |
Positive, zero & negative pressure |
| Pressure Capabilities |
40Pa |
200Pa |
5000Pa (for higher pressure applications consult Rite-Vent Technical Department) |
| Fire Rating |
4 Hours Fire Rating to BS 476 Part 20 |
| Outer Case |
304 : 1.4301 : X5CrNi 18-10 |
| Outer Case Thickness |
0.6mm |
0.6mm (150 – 455mm dia.) 0.7mm (505 – 605mm dia.) |
| Seam |
Laser or inert gas welded |
| Liner |
316L : 1.4404 : X2CrNiMo 17-12-2 |
| Liner Thickness (mm) |
0.5mm |
0.6mm |
| Insulation |
High performance mineral fibre |
| Insulation Thickness |
25mm (50, 75, 100 available) |
25mm |
| Average Thermal Resistance (200°C) |
0.508m² k/w |
Approvals
ICS is CE Certified to EN1856-1 TÜV 0036 CPR 9195 001 with designations:
ICS is CE Certified to EN1856-2 TÜV 0036 CPR 9195 041 with designations:
System Chimney EN1856-1
Connecting Flue Pipe EN1856-2
T450 N1 D V2 L50050 G100 M
T450 N1 W V2 L50050 G60
T450 N1 D V3 L50050 G60
60mm Distance to combustibles in a combustible shaft*
T450 N1 W V2 L50050 G50
T450 N1 D V3 L50050 G50
50mm Distance to combustibles in a non combustible shaft or in free air*
T200 P1 W V2 L50050 O00
Zero distance to combustibles*
• Kitemarked to BS4543 Parts 2 & 3 for gas, oil and solid fuel (Ø 80mm – 200mm inclusive)
• Manufactured under a Quality Management Scheme approved to BS EN ISO 9001
• 4 Hour Fire Rating to BS476 Part 20
• Certified for corrosion resistance on gas, oil and solid fuel by Gastec, MPA and TÜV
• HETAS listed for use on solid fuel applications.
| Technical Data |
| Fuel |
Wood, solid fuel | With Lip Seal: Gas and oil |
| Firing Temp |
450°C | With Lip Seal: 200°C |
| Short Firing Temp |
550°C | With Lip Seal: 250°C |
| Thermal Shock |
1000°C |
| Mode of Operation |
Zero & negative pressure | With Lip Seal: Positive pressure |
| Pressure Capabilities |
40Pa | With Lip Seal: 200pa |
| Fire Rating |
4 Hour Fire Rating to BS 476 Part 20 |
| Outer Case |
Stainless Steel |
| Outer Case (Option) |
Painted matt black |
| Outer Case Thickness |
0.5mm |
| Seam |
Laser or inert gas welded |
| Liner |
316L : 1.4404 : X2CrNiMo 17-12-2 |
| Liner Thickness (mm) |
0.5mm |
| Seam |
Laser or inert gas welded |
| Insulation |
High performance mineral fibre |
| Insulation Thickness |
25mm |
Average Thermal
Resistance (200°C) |
0.4m2 k/W |
DimensionsThe dimensions of the flue are:
| Int Ø mm |
100 |
125 |
150 |
180 |
200 |
| Ext Ø mm |
150 |
180 |
200 |
235 |
256 |
Approvals
ICID Plus is CE Certified to EN1856-1 TÜV 0036 CPR 9195 010 with designations:
ICID Plus is CE Certified to EN1856-2 TÜV 0036 CPR 9195 042 with designations:
System Chimney EN1856-1
T450 N1 W V2 L50050 G60
T450 N1 D V3 L50050 G60
60mm Distance to combustibles in a combustible shaft*
T450 N1 W V2 L50050 G50
T450 N1 D V3 L50050 G50
50mm Distance to combustibles in a non-combustible shaft or in free air*
Zero distance to combustibles*
Connecting Flue Pipe EN1856-2
T450 N1 D V2 L50050 G100 M
- Manufactured under a Quality Management Scheme approved to BS EN ISO 9001
- 4 Hour Fire Rating to BS476 Part 20
- Certified for corrosion resistance on gas, oil and solid fuel by Gastec, MPA and TÜV
- HETAS listed for use on solid fuel applications.
Mandatory Requirements
Connection to an appliance which is not connected to the fuel supply, should be carried out by a competent person. We recommend the use of HETAS approved installers for solid fuel applications. If installation is carried out by a non HETAS registered installer, the installation must be certified by a local Building Control inspector. Connection to an appliance that is connected to the fuel supply must be carried out by a Gas Safe (Gas) or OFTEC (Oil) registered installer.
The design guide must be read in conjunction with the detailed component installation instructions. For full design and installation details the key referral documents are:
- BS EN 1856-1: Chimneys – System Chimney Products
- BS EN 1856-2: Connecting Flue Pipes
- BS EN 1859: Metal Chimneys – Testing Methods
- BS EN 1443: Chimneys – General Requirements
- BS EN 15287-1: Chimneys. Design, installation and commissioning of chimneys. Chimneys for non-room sealed heating appliances.
- BS 5440-1: Fluing and ventilation for gas appliances of rated input not exceeding 70kW net (1st,
2nd and 3rd family gases). Specification for installation of gas appliances to chimneys and for maintenance of chimneys.
- Approved Document J: – Combustion appliances and fuel storage systems (England & Wales)
- DFP Technical Booklet L: – Combustion appliances and fuel storage systems (NI)
- Technical Handbook (Domestic & Non Domestic), Section 3 – Environment (Scotland)
- Appliance Installation Instructions and related standards. Other standards covering specific applications will also be relevant and must be adhered to.
Planning permission may be required, and reference should be made to the local Building Control Department.
Ensure all chimney components are available and check them to ensure there has been no damage. Do not use damaged components. Build the chimney up through the previous designed route which should be as straight as possible.
We have various photos of our products available on flickr. Please click here to visit our page, where you will also find images of our HETAS Approved Schiedel Training Academy, as well as examples of our products in Residential and Commercial situations.
We are featured in various online and offline publications, with articles about our products, installation examples and much more, including distributors of our range. Visit our Pinterest page to see more.
Schiedel TV Channel
Visit our YouTube channel, where you fill find a number of useful videos guides and installation instructions, as well as a number of videos showing how are steel products are made within our manufacturing base in the North East of England.
