Chimney Pipe 1470mm – B Vent

Chimney Pipe 1470mm is part of Schiedel’s B-Vent Chimney System.

B-Vent is suitable for gas appliances up to 60kW input, with diameters ranging from?100-150mm internal diameter. It’s suitable for use with flue boxes and chimney systems to fit gas fires in rooms without a conventional chimney.

Click on to the brochure to download the full range, or search our full range of B-Vent products here

SAP: Effective Length 1470mm - B Vent Categories: , Tag:

SKUInt mmColourExt mmQuantityWeightAdd to Wish List
124654100Plain127
2.6
125072125Plain152
3.24
125794150Plain178
3.64

Description

B-Vent is a Twin Wall gas heating system designed for cost-effective venting of residential and small commercial atmospheric gas appliances with input up to 60kw.

It is suitable for both internal and external use, either as a complete system or in combination with masonry, i.e. flue blocks or brick chimneys.

Note that BS 5440-1 requires the use of a stainless steel insulated flue on external runs exceeding 3 metres. ICID or ICS should be used for this type of application.

Features include:

  • Twist-lock bayonet jointing system.
  • No locking bands required.
  • Aluminium inner liner and aluzink outer
  • case which can be painted if required.
  • 12.5 mm air gap between case and liner
  • keep case temperature low.
  • 0-90° adjustable bend.
  • When joint is made, the liner covers the
  • jointing collar, shielding it and permitting
  • easy drain-down of any moisture in the flue.
Exciting news from Schiedel Chimney Systems for Stove and Chimney Installers!

Whenever you register an installation with our easy to use, online guarantee registration portal, you will now accrue points based on the number of installations and installation type.

Once you have reached a minimum of 25 points, you can begin to redeem them for £25 Love2Shop vouchers.

So start to register your installations, taking full advantage of our Lifetime Guarantee on Flex and ICID, as well as guarantees on all our other ranges, and to commence earning points 🙂

Click here for more details.

B Vent is CE certified to EN1856-1 with the designation T250 N1 D Vm L11040050 (certificate number 0036 CPD9195013)

B Vent is available in 100, 125 and 150mm internal diameters. the flue size must be as recommended by the appliance manufacturer and must not be reduced, and never smaller than the appliance spigot.

This information is provided as a guide only, and for exact flue sizing recommendations, refer to appliance manufacturer’s installation instructions and design guide.

100mm
125mm
150mm
Gas Central Heating Boiler (Wall hung/Freestanding)
Input up to 25kW
Input 25kW-40kW
Input 40kW-60kW
Gas Fires
Inset to BS 7977-1
•*
Backboiler to BS 7977-2
Gas Water Heaters
Input up to 25kW
Input 25kW -55kW
Input 55kW -60kW
Gas Stove/Cooker – (AGA/Rayburn/Stanley etc.)
Gas Flue Blocks
Connection IN
Connection OUT
Gas Warm Air Unit
Input up to 18kW
Input 18kW-35kW
Input 35kW-60kW

* When the fire has been tested and relaxed to 125° the appliance manufacturer should be consulted.

Twin wall gas heating system designed for cost-effective venting of residential and small commercial atmospheric gas appliances with input up to 60kw. It is suitable for both internal and external use, either as a complete system or in combination with masonry, i.e. brick chimneys.
Note that BS 5440-1 requires the use of a stainless steel insulated flue on external runs exceeding 3 metres.

We have various photos of our products available on flickr. Please click here to visit our page, where you will also find images of our HETAS Approved Schiedel Training Academy, as well as examples of our products in Residential and Commercial situations.

 

 

We are featured in various online and offline publications, with articles about our products, installation examples and much more, including distributors of our range. Visit our Pinterest page to see more.

Schiedel TV Channel

Visit our YouTube channel, where you fill find a number of useful videos guides and installation instructions, as well as a number of videos showing how are steel products are made within our manufacturing base in the North East of England.