Retrofit Wall Support – ICID Plus and ICS25

This component has been introduced to the range to allow for a simple, retrofit support, which has been designed to minimise the footprint of the side plates, whilst maximising the load bearing capability, allowing for one support to be used on most standard bungalow or 2 storey homes, supporting up to 10m of chimney.

Adjustable from between 60mm to 200mm from the wall, it allows for use with either 90 degree or 135 degree tees and can be retrofitted over the top of the standard pipe section immediately above the tee allowing for fast and simple installation.

Features Benefits
Supports 10m of Double Wall Chimney. One support is enough for standard bungalow and 2 storey house installations.
Adjustment on side plates 60-200mm from wall. Allows 1 component for use with standard 90 degree and 135 degree tees.
Clamp Band design. Clamp Band can be positioned anywhere on the pipe to tie in with trim collars.

Allows retrofit of support, once pipe is in position.

Captive nuts on clamp band. Simple to install. No nuts to be dropped and lost on site.

 

SAP: Retrofit Wall Support – ICID Plus and ICS25 Categories: , , , ,

SKUInt mmExt mmColourQuantityWeightAdd to Wish List
169701150200Plain
2.1
169700125180Plain
2.0
169699100150Plain
1.9
169698150200Black
2.1
169697125180Black
2.0
169696100150Black
1.9

Description

This component has been introduced to the range to allow for a simple, retrofit support, which has been designed to minimise the footprint of the side plates, whilst maximising the load bearing capability, allowing for one support to be used on most standard bungalow or 2 storey homes, supporting up to 10m of chimney. Adjustable from between 60mm to 200mm from the wall, it allows for use with either 90 degree or 135 degree tees and can be retrofitted over the top of the standard pipe section immediately above the tee allowing for fast and simple installation.

Exciting news from Schiedel Chimney Systems for Stove and Chimney Installers!

Whenever you register an installation with our easy to use, online guarantee registration portal, you will now accrue points based on the number of installations and installation type.

Once you have reached a minimum of 25 points, you can begin to redeem them for £25 Love2Shop vouchers.

So start to register your installations, taking full advantage of our Lifetime Guarantee on Flex and ICID, as well as guarantees on all our other ranges, and to commence earning points 🙂

Click here for more details.

Guarantee

We are confident in our products and so offer you (the owner) a generous guarantee in relation to the ICID system (the System). Provided that you comply in full with Your Responsibilities (below) and subject to the Small Print (below), we guarantee to you that the System will be free from defects for whichever is the greater of:

  • a period equal to the guarantee period of the appliance to which the Liner is first connected; or
  • 20 years.

For example, if your System is fitted to an appliance with a guarantee period of 10 years, we will still guarantee your System for 20 years.

In the unlikely event that the System becomes defective during the guarantee period, we will provide a like-for-like replacement for free (subject to your compliance with Your Responsibilities and subject to the Small Print). If the same model is no longer available, we will replace it with a suitable alternative.

When we say ‘no quibbles’ we mean it and so the guarantee we offer is a straightforward one; we’ve set out below what is covered and what isn’t by the guarantee as well how to ensure you benefit from it.

Click here to download the full set of responsibilities of the guarantee.

Click here to register your guarantee for this product.

ICS BIM Business Information Modelling catalogue

A range of Schiedel Products for Commercial and Residential are now available within our new 3D BIM (Building Information Modelling) Catalogue.

Engineers, planners and architects now can have an significant influence on making Schiedel the choice of the chimney at the beginning of the planning process, with the comprehensive data available for a range of components.

All BIM and AEC CAD formats, like Autodesk Revit, Nemetschek Allpan and Grafisoft Archicad for the respective CAD systems are available to engineers, planners and purchasers for free. You can add these formats under your own account section. Schiedel BIM is free to use and you just need to enter your email address to register and download your formats (for free!).

The brief video below shows the capabilities of Schiedel BIM.

 

 

ICS Plus Approvals and Technical Details

ICS ICS Plus ICS 5000
Fuel Gas, Oil, wood, coal Gas, oil Deisel generators, gas, oil
Firing temp 450°C 160°C
Continuous Firing temp 540°C
Short Firing temp 550°C 200°C 760°C
Thermal Shock 1000°C 1100°C
Mode of Operation Zero & negative pressure Positive pressure Positive, zero & negative pressure
Pressure Capabilities 40Pa 200Pa 5000Pa (for higher pressure applications consult Rite-Vent Technical Department)
Fire Rating 4 Hours Fire Rating to BS 476 Part 20
Outer Case 304 : 1.4301 : X5CrNi 18-10
Outer Case Thickness 0.6mm 0.6mm (150 – 455mm dia.) 0.7mm (505 – 605mm dia.)
Seam Laser or inert gas welded
Liner 316L : 1.4404 : X2CrNiMo 17-12-2
Liner Thickness (mm) 0.5mm 0.6mm
Insulation High performance mineral fibre
Insulation Thickness 25mm (50, 75, 100 available) 25mm
Average Thermal Resistance (200°C) 0.508m² k/w

Approvals

ICS is CE Certified to EN1856-1 TÜV 0036 CPR 9195 001 with designations:
ICS is CE Certified to EN1856-2 TÜV 0036 CPR 9195 041 with designations:

System Chimney EN1856-1
Connecting Flue Pipe EN1856-2
T450 N1 D V2 L50050 G100 M
T450 N1 W V2 L50050 G60
T450 N1 D V3 L50050 G60

60mm Distance to combustibles in a combustible shaft*

T450 N1 W V2 L50050 G50
T450 N1 D V3 L50050 G50

50mm Distance to combustibles in a non combustible shaft or in free air*

T200 P1 W V2 L50050 O00
Zero distance to combustibles*

• Kitemarked to BS4543 Parts 2 & 3 for gas, oil and solid fuel (Ø 80mm – 200mm inclusive)
• Manufactured under a Quality Management Scheme approved to BS EN ISO 9001
• 4 Hour Fire Rating to BS476 Part 20
• Certified for corrosion resistance on gas, oil and solid fuel by Gastec, MPA and TÜV
• HETAS listed for use on solid fuel applications.

Technical Data
Fuel Wood, solid fuel | With Lip Seal: Gas and oil
Firing Temp 450°C | With Lip Seal: 200°C
Short Firing Temp 550°C | With Lip Seal: 250°C
Thermal Shock 1000°C
Mode of Operation Zero & negative pressure | With Lip Seal: Positive pressure
Pressure Capabilities 40Pa | With Lip Seal: 200pa
Fire Rating 4 Hour Fire Rating to BS 476 Part 20
Outer Case Stainless Steel
Outer Case (Option) Painted matt black
Outer Case Thickness 0.5mm
Seam Laser or inert gas welded
Liner 316L : 1.4404 : X2CrNiMo 17-12-2
Liner Thickness (mm) 0.5mm
Seam Laser or inert gas welded
Insulation High performance mineral fibre
Insulation Thickness 25mm
Average Thermal
Resistance (200°C)
0.4m2 k/W

DimensionsThe dimensions of the flue are:

Int Ø mm 100 125 150 180 200
Ext Ø mm 150 180 200 235 256

Approvals

ICID Plus is CE Certified to EN1856-1 TÜV 0036 CPR 9195 010 with designations:

ICID Plus is CE Certified to EN1856-2 TÜV 0036 CPR 9195 042 with designations:

System Chimney EN1856-1

T450 N1 W V2 L50050 G60

T450 N1 D V3 L50050 G60

60mm Distance to combustibles in a combustible shaft*

T450 N1 W V2 L50050 G50

T450 N1 D V3 L50050 G50

50mm Distance to combustibles in a non-combustible shaft or in free air*

Zero distance to combustibles*

Connecting Flue Pipe EN1856-2

T450 N1 D V2 L50050 G100 M

  • Manufactured under a Quality Management Scheme approved to BS EN ISO 9001
  • 4 Hour Fire Rating to BS476 Part 20
  • Certified for corrosion resistance on gas, oil and solid fuel by Gastec, MPA and TÜV
  • HETAS listed for use on solid fuel applications.

Mandatory Requirements

Connection to an appliance which is not connected to the fuel supply, should be carried out by a competent person. We recommend the use of HETAS approved installers for solid fuel applications. If installation is carried out by a non HETAS registered installer, the installation must be certified by a local Building Control inspector. Connection to an appliance that is connected to the fuel supply must be carried out by a Gas Safe (Gas) or OFTEC (Oil) registered installer.

The  design  guide  must  be  read  in  conjunction  with  the  detailed  component  installation  instructions. For  full  design  and installation details the key referral documents are:

  • BS EN 1856-1: Chimneys – System Chimney Products
  • BS EN 1856-2: Connecting Flue Pipes
  • BS EN 1859: Metal Chimneys – Testing Methods
  • BS EN 1443: Chimneys – General Requirements
  • BS EN 15287-1: Chimneys. Design, installation and commissioning of chimneys. Chimneys for non-room sealed heating appliances.
  • BS 5440-1: Fluing and ventilation for gas appliances of rated input not exceeding 70kW net (1st,

2nd and 3rd family gases). Specification for installation of gas appliances to chimneys and for maintenance of chimneys.

  • Approved Document J: – Combustion appliances and fuel storage systems (England & Wales)
  • DFP Technical Booklet L: – Combustion appliances and fuel storage systems (NI)
  • Technical Handbook (Domestic & Non Domestic), Section 3 – Environment (Scotland)
  • Appliance Installation Instructions and related standards. Other standards covering specific applications will also be relevant and must be adhered to.

Planning permission may be required, and reference should be made to the local Building Control Department.

Ensure all chimney components are available and check them to ensure there has been no damage. Do not use damaged components. Build the chimney up through the previous designed route which should be as straight as possible.

We have various photos of our products available on flickr. Please click here to visit our page, where you will also find images of our HETAS Approved Schiedel Training Academy, as well as examples of our products in Residential and Commercial situations.

 

 

We are featured in various online and offline publications, with articles about our products, installation examples and much more, including distributors of our range. Visit our Pinterest page to see more.

Schiedel TV Channel

Visit our YouTube channel, where you fill find a number of useful videos guides and installation instructions, as well as a number of videos showing how are steel products are made within our manufacturing base in the North East of England.